WinPowerNet is our self-developed PC monitoring software could automatically collect data from controller and inverter through communication port. Equipped with enterprise specialized web server for safe dat, and you will see visual graphic chart.
Characteristic：
►RS232, RS485, Wifi, bluetooth, GPRS, RJ45（Ethernet), Zigbee communications
►Multi- products monitoring at one time
►Three monitoring devices at same time
►Visual graphic display
Controller monitoring contents
Monitoring contents
Real time data
Communication, battery and wind turbine status
Battery: voltage,current,power
Wind turbine: voltage, current, power
PV: voltage, current, power
Carbon emission
Trends graph, Multiple channel graph, simulation map etc.
History data
History data, electricity, warning, daily record
Parameters set
Battery dump load voltage, under voltage, over voltage, under voltage recovery point,
Wind turbine dump load voltage, dump load current, start charging voltage, admittance;
dawn detection point, dark detection point, light control on/off
Load set: load 1 output mode, load 2 output mode, half power start time, half power off time;
Manual brake, operation status
Node set
Add/remove area node, communication mode
Interface of controller monitoring
Inverter monitoring contents
|
Monitoring contents |
|
|
Real time data |
Communication, battery and inverting status |
|
History data |
inquiry of history data, electricity, warning, and daily records |
|
Parameters setting |
Over voltage protection, over voltage recovery point, over discharge voltage, Over discharge recovery point. |
|
Node setting |
Add/remove area node, communication mode |
Interface of inverter monitoring
